Sony Black Trinitron KV-14V5U Operating Instructions Manual Download

Page: 5 / 52

Getting Started

Connecting an indoor aerial (KV-
14V5U, KV-14V6U only)

If your local VHF/UHF signal is strong, an indoor aerial can be used to
obtain a clear picture. Connect the supplied loop aerial as follows:

Insert the aerial until it clicks.

Connect to the

(aerial) socket.

After turning on the video TV, adjust the aerial for the best reception.
Be sure to adjust the aerial for the channel you want to record as well. If
reception is poor, connect an outdoor aerial to your video TV.

Connecting an outdoor aerial

For better TV reception and clearer recording, connect an outdoor aerial to
your video TV.

To connect a VHF aerial or a combination
VHF/UHF aerial—75-ohm coaxial cable (round)

Attach an IEC aerial connector to 75-ohm coaxial cable.
Plug the connector into the

(aerial) socket, located at the rear of the

video TV.

To connect both VHF and UHF aerials

Attach the aerial cable ends to the VHF/UHF mixer (not supplied).
Plug the mixer into the

(aerial) socket, located at the rear of the video

TV.

After connecting the aerial, connect the mains lead to a wall outlet.

Rear

On a wall

VHF/UHF aerial

Rear

300-ohm twin-lead cable

VHF/UHF mixer

75-ohm coaxial cable

UHF aerial

VHF aerial

Step 2 — Connecting the Aerial

Aerial
connector
(supplied)

Note

Do not use the supplied loop aerial
with any other TV product.

Summary of Contents for Black Trinitron KV-14V5U





















































Search results

Summary of Contents for Black Trinitron KV-14V5U

Reviews:

Related manuals for Black Trinitron KV-14V5U

Brands by name

Popular brands

Sony Black Trinitron KV-14V5U, Operating Instructions Manual

Search results

Summary of Contents for Black Trinitron KV-14V5U

Reviews:

Related manuals for Black Trinitron KV-14V5U

Brands by name

Popular brands