1-16(E)
BKSI-2010
3. Information of BKSI-2011
5.
Tighten the screws secured temporarily in step 2.
The round hole next to the connector CN1 (MY-72
board) is used for inserting a screw-driver.
n
When the BKSI-2011 is installed onto the BKSI-2010, the
BKSI-2010 can process up to four-channel playback
signals.
If the BKSI-2010 cannot process expanded channel signals
even though the BKSI-2011 is installed, make sure that the
connectors are properly connected.
For the more details of the confirmation, refer to the
Maintenance Manual.
SCS-4 board
3.
Information of BKSI-2011
3-1.
Installation to BKSI-2010
1.
Remove the three screws on the SCS-4 board shown in
the figure.
2.
Temporarily secure the three brackets supplied with
BKSI-2011 to the SCS-4 board by the screws removed
in step 1.
n
Take care of the direction of bracket at installation.
3.
While inserting the brackets into the hole on the MY-
72 board and matching the position, connect the
connector CN1 on the MY-72 board to the connector
CN2001 on the SCS-4 board.
Insert the connector securely and make sure that
between connectors have no space.
4.
Tighten the three screws.
CN1 connector
CN2001 connector
MY-72 board
SCS-4 board
PTTWH3
X
6
PTTWH3
X
6
Bracket
PWH3
X
6
Screw-driver
Hole
Summary of Contents for BKSI-2010
Page 26: ......
