Sony BKMA-U70, Installation Manual

Page: 13 / 22

3-1 (E)
BKMA-U70
HDD unit
Levers
Indicator
Section 3
Replacement of the Hard Disk Drive
m
.
When capacity of the HDD is increased by installing the
BKMA-U70, the “ALL ERASE” menu needs to be
executed after replacement of the hard disk. As the pre-
recorded materials are all erased, recording of all the
materials again is requested.
.
In case that the MAV-70 is controlled by an application
software.
When the logical formatting is completed, implement the
operational processes that are required as the result
erasing the materials in the MAV-70, in the application
software side too.
.
All of the work procedures to increase the capacity of the
HDD by installing the BKMA-U70 must be executed
while the system power is kept turned off.
3-1. Replacement and Removal
Procedures of the HDD
Removal Procedures
1. Turn off the power switch. Wait until 30 seconds is
passed.
2. Remove the front panel (lower). (Refer to Section 2-2-
1 of the MAV-70 Maintenance Manual Volume1.)
3. Remove the HDD unit gently while pressing the levers
in the direction of the arrows.
n
Place the removed HDD unit on the cushion with the
warranty label side down.
HDD unit
Cushion
Label side down