Sony BKDS-PA3291, Maintenance Manual

Page: 40 / 140

3-2(E)
BVS-A3232
3-2. Normal Mode
In the NORMAL mode, the self-diagnostics are running on the BVS-A3232 under operating conditions.
The following items are displayed depending upon the setting of S7.
The setting of S7 can be changed during operation.
S7 Setting Function
0 An error detected by the self-diagnostic program is shown in ND1 (7-segment LED).
Refer to “3-5. Error Indications” for details of the error.
1 The station address of the destination which received the S-BUS signal is displayed in ND1. (01 to FF)
2 The count of all detected errors is represented by a hexadecimal and displayed in ND1. (01 to FF)
3 to 5, 7 Not used (Do not change the settings.)
3-3. Table Initialization Mode
When S7 is set to 6, the RAM ICK7 (TABLE DATA) on the CPU-94 board is initialized. An error
detected by the self-diagnostics is shown in ND1 after completion of initialization, in the same way as
when S7 is set to 0.
Refer to “3-5. Error Indications” for details of the error.
S7 Setting: 6
CPU-94 board (A side/component side)
ICK7
3-2. Normal Mode
3-3. Table Initialization Mode
8
0
4
C
S7