manualshive.com logo in svg

Sony BC-WF1000XM3, User Manual

Share
Download
Sony BC-WF1000XM3 User Manual Download Page 9

WF-1000XM3

9

Sony CONFIDENTIAL

For Authorized Servicer

REPAIRING  AND  REPLACING  OF  THE  RIGHT  SIDE  
HEADSET (WF-1000XM3R)

The right side headset (WF-1000XM3R) will be replaced in the state 
of the 

fi

 nished product. It can not be repaired by disassembling the 

right side headset (WF-1000XM3R).
When replacing the right side headset (WF-1000XM3R), perform 
the work for according to the following procedure.

Check in advance:

•  Check that you have all of the left and right headset (WF-1000 

XM3L, WF-1000XM3R) and charging case, included in the WF-
1000XM3.

•  Be sure to check that there are no WF-1000XM3 in the surround-

ings (within about 50 cm). If using WF-1000XM3 in the sur-
roundings (within about 50 cm), it may connect to another WF-
1000XM3.

Replacing procedure of right side headset (WF-1000XM3R):

1.  Replace the broken right side headset with the new right side 

headset.

Note 1:

 Change the long hybrid silicone rubber earbud or triple-comfort 

earbud to new right side headset (WF-1000XM3R) from the broken 
right side headset (WF-1000XM3R).

R

R

2.  Attach the left and right headset to the charging case.

Note 2:

 The left and right headset will display a warning message (3 times 

red 

fl

 ashing repeat), but proceed to the next step as it is.

L

R

warning message

(3 times red flashing repeat)

3.  Touch and hold the touch sensor control panel on the left and 

right headset simultaneously, and the indicator changes from 
warning message (3 times red 

fl

 ashing repeat) to red 

fl

 ashing 

(slow), in this state release the your 

fi

 nger.

Note 3:

 It takes about 10 seconds to touch and release the touch sensor con-

trol panel.

L

R

Touch sensor
control panel

L

R

Warning message (3 times 
red flashing repeat): 
Touch and hold

Red flashing (slow): 
Release your finger

4.  The left and right headset indicator automatically changes from 

red 

fl

 ashing to 4 times of blue 

fl

 ashing, and when the indicator is 

turn off, pairing of left and right headset is complete.

Note 4:

  When this operation is performed, it might not be able to connect to 

iPhone or PC.

 

    In that case, delete the registration of this unit on iPhone or PC, 

register the device again.

L

R

Turn off

Blue flashing (4 times)

L

R

5.  Check the operation of this unit and complete the right side 

headset replacement work.

SYS SET

2020/04/03 06:12:21 (GMT+09:00)

Summary of Contents for BC-WF1000XM3






















Reviews:

No comments

Brands by name

Popular brands

Load more brands