WF-1000XM3
19
Sony CONFIDENTIAL
For Authorized Servicer
SECTION 2
DISASSEMBLY
• This set can be disassembled in the order shown below.
2-1. DISASSEMBLY FLOW
Note:
Follow the disassembly procedure in the numerical order given.
2-2. ORNAMENT HINGE ASSY
SET (CHARGING CASE)
2-4. INDICATOR LED
(Page
21)
2-3. CASE INNER BLOCK
(Page
20)
2-2. ORNAMENT HINGE ASSY
(Page
19)
2-5. CASE NFC BOARD
(Page
21)
JIG
When disassembling the unit, use the following jig.
Part No.
Description
9-913-402-33 TOOL FOR DISASSEMBLING
Note:
It is necessary to disassemble the charging case only when repairing and replacing the left side headset (WF-1000XM3L).
This section only describes how to remove the CASE NFC board.
For details, refer to “REPAIRING AND REPLACING OF THE LEFT SIDE HEADSET (WF-1000XM3L)” on page 7.
1
Remove the ornament hinge
assy while slowly peeling off
the adhesive sheet ornament.
2
ornament hinge assy
Note:
When installing the ornament
hinge assy, align the two bosses
and two holes.
boss
hole
ornament
hinge assy
rear side
top side
boss
hole
front side
adhesive sheet
ornament
SYS SET
2020/04/03 06:12:21 (GMT+09:00)