WF-1000XM3
14
Sony CONFIDENTIAL
For Authorized Servicer
8. In the state of step 7, touch the N-mark part of the smartphone to
the N-mark part of the charging case.
Note 3:
Be sure to touch the new charging case of repair parts. If you touch
the charging case other than the one for repair, such as the charging
case before replacement, an error will be displayed in the next step.
9. Check that “Success!” is displayed on the screen of the smart-
phone and tap “OK” button.
Tap
Check
Note 4:
When “Success!” is not displayed, refer to “3. Error Display” on
page 16.
Note 5:
In the step 8, if you touch the charging case other than the one for
repair, such as the charging case before replacement, an error will
be displayed. In this case, restart from step 8 again.
10. End the NFC Tag Data Writing Application.
11. Check the operation of connecting smartphone and this unit with
NFC function.
(Refer to “OPERATION CHECK OF THE NFC FUNCTION
AFTER COMPLETING THE REPAIRS” on page 5)
12. Start again the NFC Tag Data Writing Application.
(The
fi
gure below is a reference example)
NFC Tag Data
Writing Application
13. Tap the “Write” button.
Tap
14. Check the “Read-only” checkbox is checked, and tap the “Write”
button and check that “Read-only” is displayed.
Put a
check
Tap
Check
WF-1000XM3
WF-1000XM3
15. In the state of step 14, touch the N-mark part of the smartphone
to the N-mark part of the charging case.
Note 6:
Be sure to touch the new charging case of repair parts. If you touch
the charging case other than the one for repair, such as the charging
case before replacement, an error will be displayed in the next step.
– Continued on next page –
SYS SET
2020/04/03 06:12:21 (GMT+09:00)
