Sony AWS-750 Operating Instructions Manual Download Page 16

Page: 16 / 121

Parts Identification

Ov
erv

iew

Power is only supplied to the XLR connector contact
points and not to the TRS contact points.
Use an insulated pointed object when setting a switch
to the ON or OFF position.

Always set these switches to OFF when you are not
using microphones that supports external power
supplies.

AUDIO OUTPUT block

PGM (PGM audio output) connectors L and R
(balanced TRS)

Outputs program audio that was mixed down on this
unit.

MIX (MIX audio output) connectors L and R (pin
jacks)

Outputs mixdown audio other than the program
audio.

VIDEO INPUT block

For details on supported signal formats, see “Supported
Input Formats” (page 109).

HDMI (HDMI input) connector 2 (Type A)

Inputs HDMI signals.

• Use a Sony HDMI cable.

Recommended cable example: HIGH SPEED
HDMI CABLE DLC-HJ20 (2 m (6.6 feet))

• Use HDMI connector 4 when inputting copyright

protected (HDCP) signals.

RGB (RGB video input) connector 2 (mini D-sub
15-pin)

Inputs RGB signals.

HDMI connector 2 and RGB connector 2 cannot be
used simultaneously. Select one or the other for use.

COMPOSITE (composite video input) connector
1 (pin jack)

Inputs analog video signals.

HD/SD SDI (SDI input) connector 1 (BNC type)

Inputs HD/SD-SDI signals.

COMPOSITE connector 1 and HD/SD SDI
connector 1 cannot be used simultaneously. Select
one or the other for use.

HDMI (HDMI input) connector 4 (Type A)

Inputs HDMI signals.

Use a Sony HDMI cable.
Recommended cable example: HIGH SPEED HDMI
CABLE DLC-HJ20 (2 m (6.6 feet))

For details on input of copyright protected (HDCP)
signals, see “[HDCP Handling]” under “System”
(page 98).

RGB (RGB video input) connector 4 (mini D-sub
15-pin)

Inputs RGB signals.

HDMI connector 4 and RGB connector 4 cannot be
used simultaneously. Select one or the other for use.

HD/SD SDI (SDI input) connectors 5 and 6 (BNC
type)

Inputs HD/SD-SDI signals.

COMPOSITE (composite video input) connector
3 (pin jack)

Inputs analog video signals.

HD/SD SDI (SDI input) connector 3 (BNC type)

Inputs HD/SD-SDI signals.

COMPOSITE connector 3 and HD/SD SDI
connector 3 cannot be used simultaneously. Select
one or the other for use.

Note

Notes

PGM

MIX

AUDIO OUTPUT

Tip

Note

Tip

Summary of Contents for AWS-750


























































































































Search results

Summary of Contents for AWS-750

Reviews:

Related manuals for AWS-750

Brands by name

Popular brands

Sony AWS-750, Operating Instructions Manual

Search results

Summary of Contents for AWS-750

Reviews:

Related manuals for AWS-750

Brands by name

Popular brands