74
GB
The sound loses stereo effect when
you play a VIDEO CD, or a CD.
,
Set “AUDIO” to “STEREO” in the Control
Menu display (page 46).
,
Make sure you connect the receiver
appropriately.
The surround effect is difficult to
hear when you are playing a Dolby
Digital, DTS, or MPEG audio sound
track.
,
Make sure the sound field function is on
(page 48).
,
Check the speaker connections and settings
(pages 24, 70).
,
Depending on the DVD, the output signal
may not be the entire 5.1 channel. It may be
monaural or stereo even if the sound track is
recorded in Dolby Digital or MPEG audio
format.
The sound comes from the center
speaker only.
,
Depending on the disc, the sound may come
from the center speaker only.
No sound is heard from the center
speaker.
,
Check the speaker connections and settings.
,
Make sure the sound field function is on
(page 48).
,
Select a sound field containing the word
“cinema” (page 48).
No sound or only a very low-level
sound is heard from the rear
speakers.
,
Check the speaker connections and settings.
,
Make sure the sound field function is on
(page 48).
,
Select a sound field containing the word
“cinema” (page 48).
Operation
Radio stations cannot be tuned in.
,
Check that the antennas are connected
securely. Adjust the antennas and connect an
external antenna if necessary.
,
The signal strength of the stations is too weak
(when tuning in with automatic tuning). Use
direct tuning.
,
No stations have been preset or the preset
stations have been cleared (when tuning by
scanning preset stations). Preset the stations
(page 29).
,
Press DISPLAY so that the frequency appears
in the display.
The remote does not function.
,
The controllable source on the remote is the
satellite receiver. Press SAT on the remote
(page 61).
,
There are obstacles between the remote and
the receiver.
,
The distance between the remote and the
receiver is too far.
,
The remote is not pointed at the remote
sensor on the receiver.
,
The batteries in the remote are weak.
The disc does not play.
,
There is no disc inside.
,
The disc is turned over.
Insert the disc with the playback side facing
down on the disc tray.
,
The disc is skewed.
,
The receiver cannot play CD-ROMs, etc.
(page 8).
,
The region code on the DVD does not match
the receiver.
,
Moisture has condensed inside the receiver.
Remove the disc and leave the receiver turned
on for about half an hour (page 4).
Summary of Contents for AVD-S50
Page 85: ...Additional Information 85GB ...
