Chip Modes: Selecting the list of modes
This step is optional and only needs to be done each time you want to change the list of modes.
As standard the chip comes in LiTE mode. If at this stage you want to swap your list of modes
(Lite, Full, A2 etc…) then do the following after activating the chip.
To select
Elite
or
Lite
mode, hold
2
(Left D-Pad) for 5 seconds.
To select
Arbiter 2
mode, hold
X
button and then
2
for 5 seconds.
After the 5 seconds the Player 3 LED will flash a certain number of times to indicate the mode.
1
flash is
Full
,
2
flashes is
Arbiter 2
and
4
flashes is
LiTE
.
Once you are in that chip select, that is it, you are good to go and don’t have to change it until
you want to change chips, even after the battery is removed. So select your desired chip once,
and then start using it. We recommend basic LiTE mode to begin with, which is what all
controllers are setup to be as default.
Quick Select
In Full mode only, because there are 70+ modes you don’t want to be pressing
2
70 times,
instead of just holding
r
, each mode section has “activator buttons” so you can get there
quicker. For example a Drop Shot + Aim section has
r
+
l
+
C
(R1+L1+Circle) in the title,
and 10 modes in that section.
To get to Mode 6 within that list first activate the chip (
r
+
a
) then instead of holding
r
and tapping
2
you hold
r
+
l
+
C
, then tap
2
6 times and release the buttons.