! IMPORTANT !
When turning on controller do not press any buttons while the Player 3 indicator is flashing. The
chip initializes when the controller is first turned on and needs all triggers to be released.
Activating
Before the chip is ready to respond to any command, you must tell it to
“
activate
”
and become
ready to receive a command. To activate hold
r
and tap the
A
(Start) button. As you do
this the Player 4 indicator light will come on.
Selecting Modes
To select a mode, first activate the chip by
holding
r
and
tapping
the
A
(Start) button so
the Player 4 LED comes on. You must activate the chip each time you want to change modes.
With the chip activated and the Player 4 LED turned on,
hold
r
down and keep
tapping
the
2
(Left D-Pad) button however many times for the mode you want, and then
release
r
.
To select Mode 11 you would
hold
r
, tap
2
11 times, and then
release
r
. The Player 3
LED will
flash
with each press of
2
, and then when releasing
r
will flash back the mode
number to confirm you are doing things correct. Slow flashes = 10, fast flashes = 1, so mode 11
is one slow flash, one fast flash.
Quick Enable / Disable
If at any point you want to quickly disable the chip, activate the chip (
r
+
a
) then press
2
without any other buttons pressed. The light will flash rapidly several times then go off. The
chip is now disabled. If you were previously in a mode and want to quickly get everything back
on, repeat the steps and it will re-enter where you left off.
Chip Modes
One feature that makes the Arbiter 3 Elite Controllers so powerful (not available on A3 LiTE
controllers) is the ability to totally change its list of modes, effectively making the chip like a
whole new product. For example some chips on the market have modes specifically for Call of
Duty, others a general all-rounder’s, but no other chip has the ability to be all of those in one.
This is what the A3 ‘Chip Select’ is. You can change the A3 into a Specific List of modes that
best suit you!
Master Reset
As the Arbiter 3 has many Features that can be turned on and off and rapid fire speeds and
other timings that can be adjusted by the user sometimes you just want to factory restore the
chip to the beginning in case you forget that is active and what is altered.
To master reset the chip, activate (
r
+
a
) then
hold down
S
+
2
for 6 seconds. After 6
seconds the light will fade in then fade out (pulse). Your chip is now reset.