The best bit is all of these can be enabled in combination meaning any of the 4 buttons can be
mapped to any other button and for any rapid fire or aiming function.
To cycle between R remapping modes first activate the chip (
r
+
a
) then hold
r
+
R
and tap
2
. Each time you tap
2
you will cycle to the next mode and the light will flash
between 1 and 4 times. Once in the mode you want, release
r
+
R
.
To cycle between L remapping modes do the same but hold
l
+
L
instead.
RT Modes
1.
Trigger Standard / Fire Standard (
r
activates,
r
rapid fires)
2.
Trigger Standard / Fire Swapped (
R
activates,
R
rapid fires)
3.
Trigger Swapped / Fire Standard (
R
activates,
r
rapid fires)
4.
Trigger Swapped / Fire Swapped (
r
activates,
R
rapid fires)
LT Modes
1.
Trigger Standard / Aim Standard (
l
activates,
l
aims)
2.
Trigger Standard / Aim Swapped (
L
activates,
L
aims)
3.
Trigger Swapped / Aim Standard (
L
activates,
l
aims)
4.
Trigger Swapped / Aim Swapped (
l
activates,
L
aims)
So let’s say we want to change the firing and aiming buttons for Call of Duty from
r
firing and
R
throwing grenades and
l
aiming and
L
throwing grenades to be similar to the Xbox
where
R
will fire and
r
throw grenades and
L
aims and
l
throws grenades.
To setup the remapping like this we want Mode 3 (Trigger Swapped / Fire Standard) because we
don’t want to swap what happens to Rapid Fire as it works for COD already, we just want to
swap the buttons we press to do that. So Mode 3 would mean (even if the chip isn’t in any
mode) pressing
R
on the controller would tell the PS3 console that you are pressing
r
, and
pressing
r
on the controller would tell the PS3 console that you are pressing
R
.
Activate the chip (
r
+
a
) then hold
r
+
R
and tap
2
until the light flashes 3 times
then release
r
+
R
.
Now when you press
R
you will fire and when you press
r
you will throw a grenade.
One thing to note is once remapping is activated all mention of buttons for activating the
chip and selecting modes would also change. For example Mode 2 and Mode 3 remapping
state “R2 activates”. This means instead of
r
+
A
to activate the chip you would actually
press
R
+
A
and the same goes for when you select modes by holding
r
you would
hold
R
.