Sony AIT-SDX470 Product Specifications Manual Download Page 130

Page: 130 / 192

7. ATAPI Packet Command Specification

RELEASE UNIT

SONY AIT-1 Turbo drive SDX-470V series Ver.1.0

7-58

7.15. RELEASE UNIT 17h

Bit

Byte

7 6 5 4 3 2 1 0

Operation Code (17h)

Reserved

3rdPty

Third Party Device ID

Reserved

Release Unit releases the drive if it is currently reserved by the requesting host.

It is not an error to attempt to release the drive if it is not currently reserved.

3rdPty:

The Third-Party release option for the RELEASE UNIT command allows a host to release a logical unit

that was previously reserved using the Third-Party reservation option.

If the 3rdPty bit is ZERO, then the Third-Party release option is not requested. If the 3rdPty bit is one, then the
drive is released, if the reservation was made using the Third-Party reservation option by the host that is

requesting the release and for the same device as specified in the Third-Party Device ID field.

Summary of Contents for AIT-SDX470

































































































































































































Search results

Summary of Contents for AIT-SDX470

Reviews:

Related manuals for AIT-SDX470

Brands by name

Popular brands

Sony AIT-SDX470, Product Specifications Manual

Search results

Summary of Contents for AIT-SDX470

Reviews:

Related manuals for AIT-SDX470

Brands by name

Popular brands