C:\d830100111\d830100111ILCE9UC2\01GB-ILCE9UC2\070WRL.indd
2019/02/19 10:01
ILCE-9
d-830-100-11 (1)
GB
195
Using ne
twork functions
Connecting the camera and a smartphone
Using a smartphone as a remote control for the camera
With Imaging Edge Mobile, you can shoot images while checking the
shooting range of the camera on the monitor of a smartphone.
1
MENU
(Network)
[Ctrl w/ Smartphone]
[Ctrl w/ Smartphone], then select [On].
2
Set up the camera and smartphone by following the procedure
below.
To establish a one-touch connection with an NFC-enabled
smartphone
Activate the NFC function of the smartphone.
• On an iPhone/iPad, launch Imaging Edge Mobile, and then select
[Scan NFC/QR Code of the Camera]
[Scan NFC of the Camera] to
activate the NFC function.
Switch the camera to the shooting mode.
Touch the (N mark) on the camera to the smartphone for
1-2 seconds.
• If you are using an Android smartphone, touch the
(N mark) on
the camera to the
(N mark) on the smartphone.
Note
• If you cannot connect the camera to the smartphone using the NFC
function, follow the procedure under “To establish a Wi-Fi connection with a
smartphone using a QR code.”
Summary of Contents for a9
