C:\d830100111\d830100111ILCE9UC2\01GB-ILCE9UC2\030BAS.indd
2019/02/19 10:01
ILCE-9
d-830-100-11 (1)
GB
103
Shoo
ting
Shutter Priority
You can express the movement of a moving subject in various ways by
adjusting the shutter speed, for example, at the instant of the movement
with high speed shutter, or as a trailing image with low speed shutter.
1
Set the mode dial to (Shutter Priority).
2
Select the desired value by turning the front/rear dial.
• If proper exposure cannot be obtained after setup, the aperture value
on the shooting screen blinks. If this happens, change the shutter
speed.
3
Adjust the focus and shoot the subject.
The aperture is automatically adjusted to obtain proper exposure.
Hint
• Use a tripod to prevent camera-shake when you have selected a slow shutter
speed.
• When you shoot indoor sports scenes, set the ISO sensitivity to a higher value.
Note
• The SteadyShot warning indicator does not appear in shutter speed priority
mode.
• When [
Long Exposure NR] is set to [On] and the shutter speed is 1 second
or longer with a [
Shutter Type] other than [Electronic Shutter] is set, noise
reduction after shooting is performed for the same amount of time that the
shutter was open. However, you cannot shoot any more while noise reduction
is in progress.
• The brightness of the image on the screen may differ from the actual image
being shot.
Summary of Contents for a9
