Sony 64 Operating Instructions Manual Download Page 67

Page: 67 / 80

Additional information

Symptom

The VTR/CAMERA or CHARGE
lamp does not light.
The CHARGE lamp flashes.

AC power adaptor

• Disconnect the mains lead. After about 1 minute, reconnect

the mains lead.

• See the following chart.

When the CHARGE lamp flashes

Check through the following chart.

* If you use a battery pack which you have just bought or which has been left unused

for a long time, the CHARGE lamp may flash at the first charging. This does not
indicate a problem. Repeat again to charge with the same battery pack.

Remove the battery pack from the AC
power adaptor. Then install the same
battery pack again.

When the CHARGE lamp flashes again

Install another battery pack.

When the CHARGE lamp flashes again

The problem is with the AC power adaptor.

Please contact your nearest Sony dealer in
connection with the problem.

When the CHARGE lamp does not flash
again

If the CHARGE lamp lights up and goes
out after a while, there is no problem.*

When the CHARGE lamp does not flash
again

If the CHARGE lamp lights up and goes
out after a while, the problem is with the
battery pack installed first.

Corrective Actions

Trouble check

Summary of Contents for 64

















































































Search results

Summary of Contents for 64

Reviews:

Related manuals for 64

Brands by name

Popular brands

Sony 64, Operating Instructions Manual

Search results

Summary of Contents for 64

Reviews:

Related manuals for 64

Brands by name

Popular brands