manualshive.com logo in svg

Sony 486DX, User Manual, Page: 8 / 71

Share
Download
Sony 486DX User Manual Download Page 8

AR-B1474 User

¡¦

s Guide

1-2

1.2  PACKING LIST

The accessories are included with the system. Before you begin installing your AR-B1474 card, take a moment to
make sure that the following items have been included inside the AR-B1474 package.

l

 

The quick setup manual

l

 

1 AR-B1474 all-in-one CPU card

l

 

1 Keyboard adapter cable

l

 

1 Parallel port interface cable

l

 

1 Hard disk drive interface cable

l

 

1 Floppy disk drive interface cable

l

 

1 40-pin header for PC/104 adapter

l

 

1 64-pin header for PC/104 adapter

l

 

1 Software utility diskettes

NOTE:

 If there are any discrepancies, please contact your Acrosser distributor immediately.

1.3  FEATURES

 

The system provides a number of special features that enhance its reliability, ensure its availability, and improve its
expansion capabilities, as well as its hardware structure.

l

 All-in-one designed 486DX/DX2/DX4 CPU card

l

 Support 3.3V/5V CPU with voltage regulator

l

 Support ISA bus and PC/104 bus

l

 Support 128KB to 512KB second level cache on-board

l

 Support up to 32MB DRAM on-board

l

 Support shadow memory and EMS

l

 Legal AMI BIOS

l

 IDE hard disk drive interface

l

 Floppy disk drive interface

l

 Bi-direction parallel interface

l

 2 serial ports with 16C550 UART

l

 DS12887 or compatible RTC

l

 Programmable watchdog timer

l

 Up to 3MB solid state disk (SSD)

l

 On-board build-in buzzer

l

 8 layers PCB

Summary of Contents for 486DX








































































Reviews:

No comments