Sony 4-114-858-12(1) Operating Manual Download

Page: 60 / 143

: Signal flow, ( ): Reference pages

Type

Camcorder

Cable

Menu Setting

(IN/OUT REC)

[VCR HDV/DV]

[AUTO] (83)

[VIDEO OUT]

[COMPONENT]

[1080i/576i] (84)

[VIDEO OUT]

[DOWN CONVERT]/

[DV WIDE CONV]

[SQUEEZE]/

[LETTER BOX]/[EDGE
CROP]

(85)

Notes

• If you connect only component video plugs, audio signals are not output. Connect the white and red plugs

to output audio signals.

(IN/OUT REC)

[VCR HDV/DV]

[AUTO] (83)
[i.LINK SET]

[HDV

DV CONV]

[ON]

(85)

Notes

• The TV needs to be set so that it recognizes that the camcorder is connected. Refer to the instruction

manuals supplied with your TV.

• This camcorder has a 4-pin i.LINK terminal. Select a cable that fits the terminal on the TV to be attached.

Change the settings according to the TV connected.

Component A/V cable
(supplied)

(Green) Y

(Blue) P

(Red) P

(Red)

(White)

i.LINK cable (optional)

Playing the picture on a TV (Continued)

Summary of Contents for 4-114-858-12(1)
















































































































































Search results

Summary of Contents for 4-114-858-12(1)

Reviews:

Related manuals for 4-114-858-12(1)

Brands by name

Popular brands

Sony 4-114-858-12(1), Operating Manual

Search results

Summary of Contents for 4-114-858-12(1)

Reviews:

Related manuals for 4-114-858-12(1)

Brands by name

Popular brands