Sony 4-114-858-12(1) Operating Manual Download

Page: 111 / 143

111

oub

les
ho
ot

ing

Pictures from connected devices cannot be zoomed.

• You cannot zoom pictures from connected devices on your camcorder.

Time code and other information appear on the display of the connected
device.

• Set [DISP OUTPUT] to [LCD PANEL] while connected with an A/V connecting cable

(p. 82).

You cannot dub correctly using the A/V connecting cable.

• The A/V connecting cable is not connected properly.

Make sure that the A/V connecting cable is connected to the input jack of the other device for
dubbing a picture from your camcorder.

When connected using an i.LINK cable, no picture appears on the monitor
screen during dubbing.

• Set [VCR HDV/DV] according to the requirements of the connected device (p. 83).

You cannot add sound to the recorded tape.

• You cannot add sound to the recorded tape on this unit.

You cannot dub correctly using the HDMI cable.

• You cannot dub pictures using the HDMI cable.

When you copy a movie shot in wide (16:9) format using an i.LINK cable, the
screen stretches vertically.

• You cannot output the aspect ratio setting using an i.LINK cable. Set the aspect ratio of the

TV instead.

• Connect using an A/V connecting cable instead.

Dubbing/Editing/Connecting to other devices

Continued

Summary of Contents for 4-114-858-12(1)
















































































































































Search results

Summary of Contents for 4-114-858-12(1)

Reviews:

Related manuals for 4-114-858-12(1)

Brands by name

Popular brands

Sony 4-114-858-12(1), Operating Manual

Search results

Summary of Contents for 4-114-858-12(1)

Reviews:

Related manuals for 4-114-858-12(1)

Brands by name

Popular brands