Installation Instruction
,
Electrical
1/000 21-2/FEA 209 544/103 A
©
Sony Ericsson Mobile Communications AB
2(9)
1
General
The Electrical Installation Instructions describes the procedures for installing all of the hardware
and software needed to perform testing, calibration, and repair activities at an Electrical level for
the Sony Ericsson products specified.
2
Go/No Go Testing
There are two options available for making an RF connection to the handset during the Go No/Go
test. One option is to use an RF Fixture (Conducted) and the other option is to use a Coupler
(Radiated).
2.1
Test Set-Up Diagram
All test hardware necessary for this test set up is documented in the Electrical Equipment List
with designated position numbers (POS).
