Draft for Sony Ericsson -- Preliminary Copy
Calls
15
Settings While On a Call
To Change the Earpiece Volume During a Call
Press the up or down volume key on the side of the
phone to increase or decrease the earpiece volume.
To Mute the Microphone During a Call
Press and hold
C
until the display shows
Muted
. Press
and hold
C
again to resume the conversation.
To Automatic Redial
If the connection of a call fails and the display shows
Retry?
, press
Yes
. The phone redials the number until
the call is connected, you press a key or you receive a
call.
Note:
Do not hold the phone to your ear while waiting.
When the call is connected, the phone gives a loud
signal.
When you receive a call, the phone rings and the
display shows
Answer?
.
If the caller’s number is identified by the Caller ID
service, the number is displayed. If you have saved the
number in your contacts, both the name and number
are displayed. If you have assigned a picture to the
contact, the picture is displayed. If the number is a
restricted number, the display shows
Unknown
.
To Use the Speakerphone
While on a call, press to activate speakerphone.
To Send Tone Signals
You can use telephone banking services or control an
answering machine by sending tone signals (also known
as DTMF tones or touch tones) during a call.
• To send the tones, press the number keys
0–9
,
*
and
#
.
• To clear the display after the call is finished, press
left softkey
.
T606UG-R1.book Page 15 Monday, December 30, 2002 11:57 AM
