Using Wireless Manager
17
To create a connection
1. From the Wireless Manager window, select
File
Connection Wizard
. The Connection
Wizard opens.
Or
Click the
Connection Wizard
button .
2. Select
Create a new connection
.
3. In the
Enter the connection name
field, type a descriptive name for the connection.
For example ‘My Connection’.
4. Click
Next
.
Note:
Your connection name should not exceed 16 characters in length for it to be fully visible
in Wireless Manager.
5. The
Type of Connection
dialogue box is displayed. Select the type of connection that you require:
• For GPRS/EDGE/UMTS see steps 1 to 8.
• For CSD see steps 1 to 10.
Creating a GPRS/EDGE/UMTS connection
1. Select
GPRS/EDGE/UMTS
.
2. If your network operator is listed in the
Choose Network
drop-down list, complete
the following steps:
3. Select your network operator, and then click
Next
. The APN is displayed.
4. Click
Next
. The user name and password are displayed.
5. If your network operator is NOT listed in the
Choose Network
drop-down list or you have
a dedicated corporate APN, complete the following steps.
a. Obtain the APN, user name, and password from your network operator or network
administrator.
a. Select
<Other>
, and then click
Next
.
a. In the
Primary APN
field, enter the APN, and then click
Next
.
a. On the User ID dialogue box, enter the user ID and password.
6. If you are required to enter a
one-time use
password each time you log on, clear the
Save Password
check box.
Notes:
•
Many network operators leave user ID and password blank.
•
Windows deliberately changes the number of asterisks that represent a password and place
asterisks in the Password field when the password is empty to make the display secure.
7. Click
Next
.
8. Click
Finish
to create your connection or
Back
to review your settings.
