LZT 123 1836
18
2.6.1
General Usage
•
Always treat the product with care and keep it in a clean and dust-free place
•
Do not expose the product to liquid
•
Avoid exposing the product to moisture or high humidity environments
•
Do not expose the product to extreme high or low temperatures beyond those
specified for operation and storage
•
Do not expose the product to open flames or lit tobacco products
•
Do not drop, throw or try to bend the product
•
Do not paint the product
•
Do not use the product near medical equipment without requesting permission
•
Do not use the product when in, or around aircraft, or areas posted “turn off
two-way radio”
•
Do not use the product in an area where a potentially explosive atmosphere
exists
•
Do not place the product or install wireless equipment in the area above a
vehicle’s air bag
•
Do not attempt to disassemble the product; only Sony Ericsson authorized
personnel should perform servicing
2.6.2
Radio Frequency (RF) exposure and SAR
Your wireless modem device is a low-power radio transmitter and receiver
(transceiver). When it is turned on, it emits low levels of radio frequency energy (also
known as radio waves or radio frequency fields).
Governments around the world have adopted comprehensive international safety
guidelines, developed by scientific organizations, e.g. ICNIRP (International
Commission on Non-Ionizing Radiation Protection) and IEEE (The Institute of
Electrical and Electronics Engineers Inc.), through periodic and thorough evaluation
of scientific studies. These guidelines establish permitted levels of radio wave
exposure for the general population. The levels include a safety margin designed to
assure the safety of all persons, regardless of age and health, and to account for any
variations in measurements.
