Sony Ericsson GM29, Integrator'S Manual, Page: 74 / 264

GM29 INTEGRATOR’S MANUAL
74
LZT 123 7361 R1B
3.10 ATS10 Automatic Disconnect Delay Control
Included for compatibility. No functionality
3.11 AT*ECAM Ericsson Call Monitoring
This command activates or deactivates the call monitoring function in
the ME. When this log function is activated in the ME, the ME informs
about call events, such as incoming call, connected, hang up etc.
It is preferable that the current status shall always be sent with result
code *ECAV when activating the log function. The purpose of this is
two fold:
• to gather relevant information for the call log in a TE;
• to make it possible for the TE to display call state information for an
ongoing call.
Description Command Possible Responses
Set Automatic Disconnect
Delay Control
ATS10=[<val>] • OK
• ERROR
Read the current setting ATS10? <val>
Show if the command is
supported
ATS10=? S10: (list of supported
<val>s)
<val> Description
2 Remains connected for two tenths of a second. Default value
1-254 Number of tenths of a second of delay
Description Command Possible Responses
Set Call Monitoring on or
off
AT*ECAM=<onoff> • OK
• +CME ERROR: <err>
• OK
• ERROR
Read the current status for
Call Monitoring
AT*ECAM? • *ECAM: <onoff>
• +CME ERROR: <err>
• OK
• ERROR
Test if the command is
supported
AT*ECAM=? • *ECAM: list of
supported <onoff>s
• +CME ERROR: <err>
• OK
• ERROR
<onoff> Description
0 The call log function is disabled (off). Default value
1 The call log function is enabled (on)