Sony Ericsson GM29, Integrator'S Manual, Page: 189 / 264

13. SHORT MESSAGE SERVICES - POINT TO POINT
189
LZT 123 7361 R1B
supports, <scts> is returned. If sending fails in a network or an ME
error, final result code +CMS ERROR: <err> is returned. This
command is abortable.
13.9 AT+CMGC Send Command
PDU Mode
Sends a command message from a TE to the network (SMS-
COMMAND). The entering of PDU is as specified in the send message
command, +CMGS. Message reference value <mr> is returned to the
TE on successful message delivery. Optionally (when +CSMS
<service> value is 1 and network supports) <ackpdu> is returned.
<index> Description
Integer type Value in the range of location numbers supported by the associated
memory
<da> Description
String type GSM 03.40 TP-Destination-Address Value in string format; BCD
numbers (or GSM default alphabet characters) are converted to
characters of the currently selected TE character (refer command
+CSCS). Type of address given by <toda>
<toda> Description
String type GSM 04.11 TP-Destination- Address Type-of-Address octet in integer
format (when first character of <da> is +(IRA 43) default is 145,
otherwise default is 129
<scts> Description
String type GSM 03.40 TP-Service-Centre-Time-Stamp in time-string format
(refer <dt>)
<mr> Description
Integer type GSM 03.40 TP-Message-Reference in integer format
Description Command Possible Responses
Send command
message
AT+CMGC=<length><CR>
<pdu><ctrl-Z/ESC>
• if PDU mode
(+CMGF=0) and
sending successful:
+CMGC:
<mr>[,<ackpdu>]
• if sending fails:
+CMS ERROR: <err>
• OK
• ERROR
Show if the command
is supported
AT+CMGC=? • OK
• ERROR