Sony Ericsson GM29, Integrator'S Manual, Page: 252 / 264

GM29 INTEGRATOR’S MANUAL
252
LZT 123 7361 R1B
revoke this adjustment. If this command is used by a subscriber without
provision of CLIR in permanent mode the network will act according
GSM 02.81.
The setting shall be per logical channel.
When the MS is turned off and then turned on again the parameter
setting <n> shall turn back to default, i.e. the presentation of CLI shall
be used according to the subscription of the CLIR service, <n> is 0.
Read command gives the default adjustment for all outgoing calls
(given in <n>), and also triggers an interrogation of the provision status
of the CLIR service (given in <m>).
Test command returns values supported by the TA as a compound
value.
Note!
On a per call base CLIR functionality is explained in subclause “ITU-T
V.25ter dial command”.
<n> Description
0 Presentation indicator is used according to the subscription of the
CLIR service
1 CLIR invocation
2 CLIR suppression
<m> Description
0 CLIR not provisioned
1 CLIR provisioned in permanent mode
2 Unknown (e.g. no network)
3 CLIR temporary mode presentation restricted
4 CLIR temporary mode presentation allowed