Sony Ericsson GM28, Integrator'S Manual

Page: 255 / 268

16. SUPPLEMENTARY SERVICES
255
LZT 123 7468 R1A
Unsolicited Result codes:
+CLIP: <number>, <type>,,,<alpha>
Defined values:
16.15 AT+CLIR Calling Line Identification Restriction
This command refers to CLIR-service according to GSM 02.81 that
allows a calling subscriber to enable or disable the presentation of the
CLI to the called party when originating a call.
Set command overrides the CLIR subscription (default is restricted or
allowed) when temporary mode is provisioned as a default adjustment
for all following outgoing calls. Using the opposite command can
<m> Description
0 CLIP not provisioned
1 CLIP provisioned
2 Unknown (e.g. no network)
<number> Description
String Type phone number of format specified by <type> type of
address octet in integer format (refer to GSM 04.08, sub-
clause 10.5.4.7)
<type> Description
129 129 ISDN/telephony numbering plan, national/
international unknown
145 145 ISDN/telephony numbering plan, international number
161 161 ISDN/telephony numbering plan, national number
128-255 Other values refer to GSM 04.08 section 10.5.4.7
Description Command Possible Responses
Request calling line
identification restriction
AT+CLIR=[<n>] • +CME ERROR <err>
• OK
• ERROR
Read the current
setting
AT+CLIR? • +CLIR: <n>,<m>
• +CME ERROR <err>
• OK
• ERROR
Test if the command is
supported
AT+CLIR=? • +CLIR: (list of supported
<n>s)
• +CME ERROR <err>
• OK
• ERROR