Sony Ericsson GM28, Integrator'S Manual

Page: 202 / 268

GM28 INTEGRATOR’S MANUAL
202
LZT 123 7468 R1A
<oa> Description
String type GSM 03.40 TP-Originating-Address Value in string format;
BCD numbers (or GSM default alphabet characters) are
converted to characters of the currently selected TE
character (refer cCSCS). Type of address given
by <tooa>
<da> Description
String type GSM 03.40 TP-Destination-Address Value in string format;
BCD numbers (or GSM default alphabet characters) are
converted to characters of the currently selected TE
character (refer cCSCS). Type of address given
by <toda>
<toda> Description
String type GSM 04.11 TP-Destination- Address Type-of-Address octet
in integer format (when first character of <da> is +(IRA 43)
default is 145, otherwise default is 129
<tooa> Description
String type GSM 04.11 TP-Originating-Address Type-of-Address octet
in integer format (default refer <toda>)
<tora> Description
String type GSM 04.11 TP-Recipient-Address Type-of-Address octet in
integer format (default refer <toda>)
<alpha> Description
String type Manufacturing specific. Should be left empty but not
omitted, i.e. commas shall mark the place were it should
be. Used character set should be the one selected with
command Select TE Character Set +CSCS
<scts> Description
String type GSM 03.40 TP-Service-Centre-Time-Stamp in time-string
format (refer <dt>)
<length> Description
Integer type Value indicating in PDU mode (+CMGF=0), the length of
the actual TP data unit in octets (i.e. the RP layer SMSC
address octets are not counted in the length)