Working Instruction
,
Mechanical
3/000 21-1/FEA 209 544/86 E
Company Internal
©
Sony Ericsson Mobile Communications AB
15(43)
Step-by-Step Instructions
9
Press down the cavity with your fingers (see the
arrow) until the front and frame are assembled
together.
NOTE!
Make sure that the irda window is in its right
position.
10
Gently press with your fingers on the corners on
the front and the frame.
NOTE!
Make sure that there are no gaps around the
corners.
11
Finally, press on the middle of the phone on
both sides until the two latches at the arrow
locks the front and frame together with a “click”
sound.
NOTE!
Check so there is no gaps around the phone.
If there still is a gap somewhere, gently press the
two half’s together with your fingers.
12
Place the battery into the frame cavity. Start at
the battery connector area (1), press upwards
towards the camera then push it down.
NOTE!
Make sure that the plastic spring at the end of
the frame cavity is locked (2).
