Working Instruction
,
Mechanical
3/000 21-1/FEA 209 544/86 E
Company Internal
©
Sony Ericsson Mobile Communications AB
13(43)
Step-by-Step Instructions
3
NOTE!
Do not touch the display glass with your fingers.
Assemble the display flexfilm into the FPC
connector (1). Use the flex film assembly tool.
Close the FPC connector with a blunt pair of
tweezers.
Assemble
a
new
Zif
tape
with the help of a pair
of tweezers (2).
Gently fold the LCD with your fingers to the
correct position by using the frame guiding pin
(3).
Make sure that the LCD assembly is locked by
the two frame snap fit hooks (4).
NOTE!
If you have assembled a new display:
Remember to remove the display protection
foil (5) with a pair of tweezers.
4
NOTE!
Use 15 Ncm of torque for the screws.
Assemble four
new
screws. Tighten the cabinet
screws according to screw sequence shown in
the picture.
