Sony Ericsson CM52 User Manual Download

Page: 53 / 158

Confidential
USERS MANUAL

53(158)

Document number

Revision

1/198 17-4/FCP 101 3045 Uen

Parameter

Common for NAM

1 and NAM 2

Description

<MIN>

Different

Mobile Identification Number (MIN) is the phone number
string.

0000000000-
9999999999

Must supply all 10 digits. The default is 0000000000.

<A-key>

Different

Authentication key provided by the service provider.

6-26 digits

Only digits (0-9) allowed. Service provider provides the
default value.

Note:

The A-Key parameter is actually a combination of the

A-Key and the associated A-Key checksum.

<PRL_List_ID>

Different

PRL List ID. The PRL list ID denotes the version number of
the PRL.

0 indicates PRL not loaded.

1-65535

Loaded when PRL is activated.

<Name>

Different

Carrier defined text name

String

NAM 1 and NAM 2 are the default values. The value is
truncated if length is greater than 12 characters.

<SMS>

Different

SMS Service Select

0 (default)

Standard SMS disabled: temporary “MAIL” email
addressing.

Standard SMS enabled: standard IS-41 addressing.

<Emrgncy_Num_1>

Common

Emergency Number 1

String (empty is
default)

Phone number string, 1-10 digits. Characters 0 – 9 and *
and # valid.

<Emrgncy_Num_2>

Common

Emergency Number 2

String (empty is
default)

Phone number string, 1-10 digits. Characters 0 – 9 and *
and # valid.

<Emrgncy_Num_3>

Common

Emergency Number 3

String (empty is
default)

Phone number string, 1-10 digits. Characters 0 – 9 and *
and # valid.

<Slot_cycle_index>

Common

Slot cycle index

0-7 (default is 2)

<Mobile_Country_Co
de>

Different

Mobile Country Code (MCC)

000-999

Must provide all 3 digits. The default is 000.

<Mobile_Network_Co
de>

Different

Mobile Network Code (MNC)

00-99

Must provide both digits. The default is 00.

<PRL_Enabled>

Different

Preferred Roaming List

Disable Preferred Roaming List.

1 (default)

Enable Preferred Roaming List.

<CDMA_Dir_Num>

Different

CDMA Directory Number.

000000000000000-
999999999999999

Must provide all 15 digits. The default is
000000000000000.

Indicates if the parameter is the same (common) for NAM 1 and NAM 2 or if the parameter is different for the two NAMs.

Summary of Contents for CM52































































































































































Search results

Summary of Contents for CM52

Reviews:

Related manuals for CM52

Brands by name

Popular brands

Sony Ericsson CM52, User Manual

Search results

Summary of Contents for CM52

Reviews:

Related manuals for CM52

Brands by name

Popular brands