approximately 2.5 hours to fully charge
the battery.
To remove the charger
1
Charge your battery until the battery
icon indicates a full charge.
2
Tilt the USB charger connector
upwards to remove it.
Note
•
If there are two USB cables in the kit
(USB cable for charging and USB
cable for data transferring, see the
illustrations below),
then the USB
cable for charging is only intended
for charging your phone. Do not use
it for transferring data.
The USB
cable for the USB charger is only
intended for connection to the AC
adapter to charge your phone.
It
must not be used for connection to
a PC. It can only be used for
charging your phone. Never use it
for charging accessories.
USB cable for charging
USB cable for transferring
•
If there is only one USB cable in the
kit, it is intended for charging your
phone as well as transferring data.
•
If there is only one USB cable for the
USB charger in the phone kit, this
USB cable is only intended for
charging your phone.
•
Sony Ericsson strongly recommends
that you
use only Sony Ericsson
branded original batteries, the part
Getting started
9