
C903
1228-1147 rev. 1
APPENDIX
A
PPE
N
D
IX
Connect the Key Flex Assy directly to the PBA
when Keyboard is in use according to picture 13.
Picture 13
When the Display, Navigation Keypad, Earphone,
VGA-VTF Camera or A-GPS Module is needed
then use the TRS Fixture Display Holder and
connect the Main Flex Assy directly to the PBA
see pictures 14 and 15.
Picture 14
Picture 15
Connect Power Supply Channel 1 (VBATT) Black
and Red Lab Plugs to the TRS Fixture according
to picture 16.
Picture 16
Connect the Power Supply Channel 2 Cable
(DCIO/SEPI) according to picture 17.
Picture 17
Secure the DCIO/SEPI Cable by using the locking
screw according to picture 18.
Picture 18
Connect the Customized FM Radio Cable
according to Step 1 and 2, see picture 19.
Step 1:
Connect the Black Lab Plug to the TRS Fixture
GND input.
Step 2:
Connect the Hands-Free (PHF) connector to the
Phone system connector (X2405).
Picture 19
Connect the RF Cable Flexible with SMK RF Probe
to the X1200 RF Switch according to picture 20.
Picture 20
Secure the SMK RF Probe with the RF Probe
locking device according to picture 21.
Picture 21
The PINs marked with GND text on the Bottom-
part of the TRS Fixture can be used as an MP TRS
Fixture GND or grounding for the oscilloscope
probe, see pictures 22 and 23.
Picture 22
Picture 23
The PIN mounted inside TRS Fixture can be used
as an MP TRS Fixture GND or grounding for the
oscilloscope probe see picture 24.
Picture 24
SEMC Troubleshooting Manual
129
(129)