Sonus Faber Homage Vox, Owner'S Manual, Page: 22 / 38

System
3 way, low spurious vibration optimized, stealth reflex para-
aperiodic loading, horizontal loudspeaker system.
Cabinet
Lute shape design, multilayer, constrained-mode damping,
enclosure formed using hand selected wood layers, quality
graded and oriented for carefully optimized resonances control.
Sub-structural ribs are strategically placed for absolute rejection
of spurious vibrations. “New Era” avional (from “The” experience)
exo-squeleton clamp structure inhibiting the residual resonances
of the wooden structure.
Tweeter
29XTR3. A Sonus faber designed 29 mm moving coil driver. The
ultra dynamic linearity is given by the new Neodymium motor
system.
Midranges
Sonus faber M15XTR. A totally Sonus faber designed 150
mm ultra dynamic linearity midrange. CCAW wire is used on a
composite former “eddy current free” voice coil. The dynamically
linear magnetic field motor incorporates triple Kellog/Goeller
rings. A special custom diaphragm is made with a real time air
dried non pressed blend of traditional cellulose pulp, kapok,
kenaf and other natural fibers, developed according to the most
natural sound. To further inhibit any residual cone coloration
we are using a transparent viscous surface damping coating.
Special coaxial anti-compressor are used, designed to remove
cavity resonance and distortions.
Woofers
180 mm, lightweight elastomer foam damped Aluminium/
Magnesium alloy cone driver in an acoustically amorphous
“stealth reflex” chamber. A long-throw motor system with a 1,5”
controlled “eddy current” voice coil is implemented for high speed,
performance and linearity. Special coaxial anti-compressor are
used, designed to remove cavity resonance and distortions.
Cross-over
Non-resonant “progressive slope” design, optimized amplitude/
phase response for optimal space/time performance. “Paracross
topology” on both tweeter hi-pass and midrange band
pass, cross-over points 250 Hz – 1.800 Hz. Highest quality
components are used including Mundorf Evo Oil capacitors and
Jantzen inductors.
Frequency Response
(tuning port included)
50 Hz – 30.000 Hz
Sensitivity (2.83V/1m) 89 dB SP
Nominal Impedance 4 Ω
Suggested Amplifier Power Output
(without clipping)
30W – 300W
Long-term max input voltage
(IEC-268-5)
20V rms
Dimensions HxWxD (mm) 310x825x390
Weight (kg) 37 Kg – net weight / 43 Kg – shipping weight.