Type of counting:
Various counting types are possible for the
inputs A3-A6:
Disable: counting deactivated.
Binary counting: pulse counting.
Time counting: counting the
operating time.
Amount counting: time factor for
each digital input.
The Medium and ID are defined: e.g. for A3 ID 3 applies and for A6 ID 6. The Medium is always
set to “Water”.
The speed is automatically adjusted depending on the chosen counting type:
Binary counting = Fast.
Time counting; Amount counting= Slow.
Binary counting : pulse counting.
The work unit must be the Wh.
The pulse factor « Ax factor » must be
defined according to the unit Wh.
The initial value « Ax value »
corresponds to the starting value of the
electricity meter. This value allows to
compare the evolution of both meters,
electricity and SPF.
Time counting : counting the operating
time.
This function allows to know the
duration operating time of the heat
pump. The unit used is the minute.
This value is independent of the
electrical energy consumed by the
heating pump.
The counting can be by open or close
contact.
0470P004 Manual Superstatic 470 SPF 02-03-2015
17
