Manual Supercom 646 GPRS rev. 04-02-2011
38
12. Annexe D
12.1 Parameterization
12.1.1 PIN code
The PIN code is a “password” which enables services defined on the SIM card to be used. The mobile tele-
phone service provider supplies a PIN code for each SIM card.
The PIN code must be parameterized in the central unit using Tools646 in a direct connection
(optical interface, RS232 or USB). Remote parameterization of the PIN code is not possible.
12.1.2 Call back number
If the CSD MT service is not supplied by the mobile telephone subscription, a call back number must be pa-
rameterized.
The call back number is the telephone number assigned to the modem which is used by
Tools646.
The call back number must be parameterized in the central unit using Tools646 in direct connection (optical
interface, RS232 or USB). Remote parameterization of the call back number is not possible.
12.1.3 Password for SMS controls
A password can be defined to receive SMS messages. All SMS which do not begin with the password will
simply be disregarded.
This gives protection against undesired SMS and avoids the need to send a reply.
The SMS password must be parameterized in the central unit using Tools646.
12.1.4 GPRS access
The FTP-GPRS module needs some information to connect up to the GPRS network.
The mobile telephone service provider must supply the following information:
Example:
Access Point Name
gprs.swisscom.ch
Username
gprs
Password
gprs
DNS
164.128.036.034
This information must be parameterized in the central unit using Tools646.
