Tel: +44 (0)1732 861200
-
E
-
mail: [email protected]
-
Web: www.sontay.com
© 2017 Sontay Limited. All rights reserved
RF
-
LW
-
HUB
IoT LoRaWAN to BACnet IP/Modbus TCP/MQTT Hub
Issue Number 7.0
10/08/2022
Four Elms Road
-
Edenbridge
Kent
-
TN8 6AB
-
UK
3 of 27
Markings
Disposal and recycling
Electrical and electronic equipment may not be disposed of with household waste. This also applies to products that do not carry this
logo. Electrical and electronic equipment contain materials and substances that can harm the environment and human health. At the
end of their life, electrical and electronic equipment must therefore be disposed of in an appropriate way. The European WEEE
Directive 2012/19/EU applies throughout the European Union. The directives and laws that transpose it into national law may vary
from country to country. Environmentally sound disposal is good for your health and protects the environment from harmful
substances in electrical and electronic equipment.
•
Observe national and local regulations regarding the disposal of electrical and electronic equipment.
•
Erase all data stored on electrical and electronic equipment.
•
Drop off or send your electrical and electronic equipment to your local specialized collection point.
This symbol is only valid in the European Union (EU). For disposal in countries out of the European Union please contact your local authorities
or dealer and ask for the correct method of disposal.
CE & UKCA Marking
This product is manufactured in accordance with the technical specifications of the product and is in compliance in all
respects with the relevant standards and regulations.
FCC
-
IC Compliance Statement
FCC ID : 2A2KQ
-
WSGW1
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be
determined by turning the equipment off and on, the user is encouraged to try to correct interference by one or more of the
following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
WARNING
: This product is only to be installed by qualified personnel.
Cellular RF
This device contains a cellular RF module with FCC ID
: 2AJYU
-
8PYA004
This device contains a cellular RF module with IC
: 23761
-
8PYA005
FCC Caution:
1.
Exposure to Radio Frequency Radiation. This equipment must be installed and operated in accordance with provided instructions and
the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must
not be collocated or operating in conjunction with any other antenna or transmitter. End
-
users and installers must be provided with
antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
2.
Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the
equipment.
3.
This Transmitter must not be co
-
located or operating in conjunction with any other antenna or transmitter.
4.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to
operate the equipment.
