Tel: +44 (0)1732 861200
-
E
-
mail: [email protected]
-
Web: www.sontay.com
© 2017 Sontay Limited. All rights reserved
RF
-
LW
-
HUB
IoT LoRaWAN to BACnet IP/Modbus TCP/MQTT Hub
Issue Number 7.0
10/08/2022
Four Elms Road
-
Edenbridge
Kent
-
TN8 6AB
-
UK
15 of 27
•
Connect all equipment to the switch via the Ethernet cables.
To configure each one of the equipment:
•
From the technical documentation of the equipment, retrieve its IP address and the BACnet port.
•
If the equipment does not have an IP address, assign one to it, 192.168.1.1 for the first device, then 192.168.1.2 for the second device,
192.168.1.3 for the third device, and so on.
•
Write down the IP address and BACnet port, the brand, and model of the equipment, and any other identifying information. This
information will be required to configure the installation and to retrieve data.
Modbus IP
To connect one equipment
•
Make sure to have an Ethernet cable.
•
Connect the cable to the Ethernet port of the Hub ETH1 or ETH2.
•
Connect the other end of the cable to the equipment.
•
Verify that the LED ETH1 or ETH2 lights up.
