Tel: +44 (0)1732 861200 - E-mail: [email protected] - Web: www.sontay.com
© 2017 Sontay Limited. All rights reserved
Page 1 of 4
RE-3P-105
3-Phase Panel Mount 105kW
Issue Number: 7.0
Date of Issue: 02/01/2018
Four Elms Road
Edenbridge
Kent
TN8 6AB
UK
Features & Benefits
0-10Vdc control input
Over temperature protection with auto reset
LED Indication
Efficient electronic switching
No additional heat sinks or RFI filters required
Technical Overview
The panel mounting Power Controllers RE-3P range are suitable for providing control of electric heating loads from an analogue signal. Applications
include electric heating coils, heating cables and electric furnaces. The units utilise solid-state switching with “zero crossing technology” to provide
accurate switching control.
All items are provided with an alarm output for over temperature protection and LED Indication of Output ON.
The RE-3P series are designed to mount on the control panel back plate.
Specification
Input signal
0-10Vdc
Input impedance
47k ohms
Heater duty
105kW
Rated load
146A
Rated supply
415Vac (+10/-15%) 50/60Hz
LED indication
ON when output is on
Terminals:
Control
Rising cage terminals
Power
Din-rail terminals (35mm²)
Fuse type
315FM
Temperature
-10 to +40°C Max, without re-rating *
Dimensions (H W D)
252 x 265 x 159mm
Fixing centres
243 x 194mm
Conformity
CE Marked
Country of origin
UK
* Units are rated at 40°C. If using at higher ambient temp, de-rate the
units by 20% at 50°C
The products referred to in this data sheet meet the requirements of
EU 2014/30/EU and 2014/35/EU
Product Codes
RE-3P-105
105kW, 3-phase 146A (per phase), Panel Mount
Heating Regulator
WEEE Directive:
At the end of the products useful life please dispose
as per the local regulations.
Do not dispose of with normal household waste.
Do not burn.
