27
Solutions
Charge your Roger receiver for at least four hours.
One or all devices are switched off.
Make sure all devices (Roger NeckLoop, Roger microphone, hearing
aids) are turned on and fully operational.
Switch your hearing aids to the T-coil program.
Connect Roger NeckLoop with your Roger microphone by pressing
‘Connect’ on your microphone. Note that Roger NeckLoop needs to be
within 10 cm/4 inches of your Roger microphone.
Press the ‘+‘ button on Roger NeckLoop to increase the volume.
Unmute the Roger microphone (refer to its User Guide).
switched off.
Make sure all Roger microphones are turned on and fully operational.
Move closer to the Roger microphone to be within its operating range.
