ISONIC utPod from Sonotron NDT - Operating Manual – Revision 1.18 - Page 21 of 94
5.2.1. Gain
Click on
to control
Gain
setting. The control related to
Gain
setting and possible manipulations
are shown below.
Increment for
Gain
setup
\
Current
Gain
Click on to increase
Gain
Click on to decrease Gain
Click on to select increment for
Gain
setting
The rules as above are applicable to control of all other parameters and modes of
ISONIC utPod
, for
manipulation of which there are provided controls of the same type
The alternative way to display / manipulate of current
Gain
setting:
Touch area
A
on the A-Scan – the current
Gain
setting appears in that area upon and kept on the top of the
screen for several seconds after area
A
untouched
Touch area
B
on the screen and keep the said area touched unit
Gain
decreased to the needful value – the
appropriate indication is provided in the area
A
on the A-Scan during all time of such Gain manipulation and
kept on the top of the screen for several seconds after area
B
untouched
Touch area
C
on the screen and keep the said area touched unit
Gain
increased to the needful value – the
appropriate indication is provided in the area
A
on the A-Scan during all time of such Gain manipulation and
kept on the top of the screen for several seconds after area
C
untouched
A
C
B