Operating Manual | 4 Preparing a work order
SONASCREEN
38 / 89
Revision: 1.0 | 2022-03-04
2.
Tap the "Trigger" icon.
3.
Activate the
enabled
checkbox.
4.
Enter the particular values in the
Pre-trigger time
,
Post-trigger time
and
Trigger level
fields.
5.
In the
Data to store
picklist, select the data you want to save.
6.
In the
Trigger method
picklist, select the
beampicture
option.
7.
Close all screens to switch to the "Start" screen.
The trigger settings will be used starting with the next measurement.
"Spectrum" trigger method
In the "Spectrum" trigger method, multiple grid points may be defined as triggers within the
spectrum. Each grid point contains values for frequency and trigger level. A reference
spectrum is generated from the grid points.
The following basic parameters are defined for the trigger method:
