SonoSite SonoRemote Control, User Manual, Page: 9 / 18

5
• (S Series) In 2D imaging, click Setup on
the vertical row of control keys, and then
click USB Devices .
Setup may not be on the first page.
4 On the USB Devices setup page, select
Bluetooth .
Bluetooth is available about a minute after
you insert the Bluetooth USB adapter.
5 Turn on the remote control. (See “Turning on
power and charging the battery” on page 3.)
The Bluetooth indicator blinks fast.
6 Simultaneously press and on the
remote control until the beep, and then
release.
The Bluetooth indicator blinks slowly.
7
Select
Search
in the lower lefthand corner of
the ultrasound system screen.
The ultrasound system searches for Bluetooth
devices. The process can take several minutes.
8
Select the remote control (BlueHID ##:##) in
the
Bluetooth Devices
list, and then select
Connect
at the bottom of the screen.
In the Bluetooth Devices list, the remote
control’s status changes to Connected.
To disconnect the remote control
1 On the ultrasound system’s USB Devices
setup page, select Bluetooth . (See “To display
the USB Devices setup page” on page 1.)
2 Select the remote control (BlueHID ##:##) in
the Bluetooth Devices list, and then select
Disconnect at the bottom of the screen.
If Disconnect is not available, select Search ,
and then select Disconnect .
Note: On the USB Devices setup page, the
connected remote control is listed twice: as Remote
and as Keyboard.
Controlling the ultrasound
system
You can control the ultrasound system by
pressing the six buttons on the remote control or
using six voice commands.
Buttons
The buttons on the remote control perform the
following commands.
See also “Reviewing the cine buffer” on page 7.
If the remote control is connected, you can press
the buttons, even if the microphone is connected.
Decreases the depth
Increases the depth
Increases the gain (live image)
Reviews the cine buffer (frozen image)
Decreases the gain (live image)
Reviews the cine buffer (frozen image)
Freezes (or unfreezes) the image
Saves the image