3 Operating Instruction
3.1
Connecting to the SX-R4+
A
3M MDR 26-pin pin-to-pin cable
is required to interconnect the SX-RC8+ to the SX-
R4+. The SX-RC8+ is powered by the SX-R4+ and operates as soon as it is
connected to it.
3.2
Operating modes
The SX-R4+ menu SETUP/POT SETUP
allow to select 3 different operating
modes:
•
Input gains
•
Fader -60 to +12 dB
•
Fader -60 to +24 dB
Input gains apply to AES input 1 to 8.
Fader mode have two different curves:
•
-60 to +12 dB
•
-60 to +24 dB
Both curves mute when fader is closed.
Faders must be assigned in the SX-R4+
MIX menu.
To assign a fader, press the ASSIGN
button.
First, choose the fader to be assigned
using the rotary encoder.
Then, push all track or track pair buttons
where the fader is to be assigned.
Push again the ASSIGN button to disable
fader assignation.
3.3
AES Breakout
The 4 TA3 connectors are used as AES breakout box, allowing easy connection of
AES sources such as digital wireless receivers.
The 4
th
TA3 connector (AES 7-8) is shared with the Slate/Com microphone AES
output.
SX-RC8+ User Manual
5/8
