Sonoro sonoroHIFISO-510, Operating Manual, Page: 84 / 279

L
CAUTION!
Risk of injury due to heavy weight!
Due to its weight, the device can cause injury if
carried by a single person during transportation,
either during lifting or if it is dropped on body
parts.
– Always work in a team of two when lifting and
transporting the device.
– Always work in a team of two when attaching
the stand.
L NOTICE!
Material damage due to incorrect attachment
will result in material damage!
Incorrect attachment can cause damage to the
surface and lead to malfunctions.
– When attaching the stand, place a cloth under-
neath the device to prevent the surface from
being scratched.
– The device is very heavy. Always work in a team
of two for any assembly work in order to pre-
vent the device from falling.
– Always take care to ensure that cables do not
get trapped when performing any work on the
device.
– The front, edges and corners of the device are
all vulnerable to pressure. Protect these areas
to prevent them from being subjected to exces-
sive pressure.
Attaching the threaded rod
Fig. 10: Attaching the threaded rod
1. Insert the pre-assembled threaded rod
through the baseplate from below .
2. Turn the threaded rod until the cut-out is
pointing away from you.
3. Place the protective cover with cable opening
on the threaded rod .
4. Make sure that the cut-out in the protective
cover with cable opening points away from
you.
©
sonoro audio GmbH 2016 84