Sonoro sonoroHIFISO-510, Operating Manual, Page: 101 / 279

5.3.4 AUX playback
i
– The AUX IN 1 input can be used to connect and
play back from other audio devices using an
RCA cable.
– The AUX IN 2 input can be used to connect and
play back from other audio devices using a
3.5 mm jack.
Prerequisite: The device is on.
1. Plug the RCA cable into the AUX IN 1 input/the
3.5 mm jack into the AUX IN 2 input on the back
of the device.
2.
Press repeatedly until the display
shows „Aux.1 Input“ or „Aux.2 Input“ .
Alternatively:
Briefly press
.
3. Press or to confirm your selection.
4. Turn on the external device and use it to control
playback.
5.3.5 Playback via Optical In
i
The Optical In input can be used to connect and
play back from other audio devices using a
TOSLINK cable.
Prerequisite: The device is on.
1. Insert the TOSLINK cable into the Optical In
input on the back of the device.
2. Press repeatedly until the display
shows „Optical Input“ .
Alternatively:
Briefly press .
3. Press or to confirm your selection.
4. Turn on the external device and use it to control
playback.
5.4 Playing back demo music
i
Demo music
Demo music can be played in standby mode to
demonstrate the device in a shop, for example.
The following tracks are available as demo music:
– Hotel California
– Acoustics
– New Age
– Classical
– Jazz
– Rock
Activating demo music
Prerequisite: The device is in standby mode.
1. Press and hold for approx. 3 seconds.
ð
Demo music mode is activated.
2. Use or to select the track you wish to
play.
ð
The display shows the title of the demo
music.
i
The following buttons are active:
– /
– /
– /
– /
– /
–
©
sonoro audio GmbH 2016 101