SIDE BURNER PARTS ASSEMBLY
1. Remove burner assembly from packaging. (See Fig. 7)
2. Loosen the bolts on the side of the grill and attach the
shelf by allowing the bolt heads to fall through the large
openings in the bottom of the keyhole slots. Slide the
shelves downward until the bolts are resting against the
top of the key hole slots. Tighten the (4) shelf bolts.
(See Fig. 8-9)
3. Attach burner to burner shelf by inserting the valve
(toward front of the grill) end first, then sliding the
burner/igniter assembly through the holes in the top
of the burner shelf. It may be necessary to bend the
gas line slightly to fit the burner assembly.
(See Fig. 10-11 )
4. Insert two (2) 1/4" self tapping screws through the top of
the shelf to secure the burner assembly. (See Fig. 12)
5. Install 1 Phillips head screw through the knob bezel,
through the shelf, attaching the valve assembly to the
front of the side burner. (See Fig. 13)
4
Side Burner Assembly
Fig. 11
Fig. 7
Fig. 8
Fig. 10
Fig. 12
Fig. 13
Fig. 9
