6
4046061-E
INSTALLATION
The vent hood mounts to the back panel, which is attached to a solid support wall. Remove
the vent hood back panel from the vent hood as shown in the following pictures and drill
holes through the back panel for mounting to the wall. The vent hood can also be supported
from the top plate using cable or all-thread; four holes in the top plate are provided for at-
taching cable eyelets or all-thread.
The following instructions are basic suggestions for a
common installation; it is advised to practice safe construction techniques when in-
stalling the vent hood to prevent damage to person or equipment during operation.
Remove the two (2) lock nuts from
the back panel support studs.
Remove three (3) back panel attach-
ment screws from the top of the vent
hood.
The back panel is mounted to the vent
hood by hook and slot; remove the
back panel from hooks.
