13
4046061-E
Caution:
Disconnect power to the vent hood before
attempting bulb replacement.
Remove two (2) screws from the lens cover and re-
move. See Figure 9.
Remove the bad bulb and discard.
DO NOT TOUCH NEW BULB WITH FINGERS.
The oils from your fingers will damage the bulb. Use
a dry cloth or paper towel to replace the bulb.
Insert the new bulb pins into the bulb socket ensuring
that the pins are fully inserted.
Replace the lens cover in the opposite order.
Caution:
The lens is made of tempered glass and must
be replaced with tempered glass if broken. Please con-
tact sonofresco for a replacement if lost or damaged.
Figure 9
Bulb Replacement
Troubleshooting
The vent hood is designed with few moving parts to minimize the possibility of failure. If the vent
hood is not operating correctly, check that the installation is correct and use the following table to
troubleshoot the problem. If a solution is not found, contact sonofresco (360)757-2800 for addi-
tional assistance.
Vent hood will not operate when turned on.
Check that unit is plugged into a 120 VAC 2.0 amp
circuit.
Vent hood will not vent properly.
Check that power is on.
Check that the inlet screen is clean.
Check venting system for obstructions and clean ac-
cordingly.
