Install Drives
1.
Remove the Fusion QR from its packaging, and place it on a flat,
level surface, with the front panel facing you.
2.
Lift up the front of the enclosure, slide the inner chassis lock
switch to the left and hold it
(Figure 1)
, and then push the inner
chassis from the back until it stops
(Figure 2)
.
3.
Pull the front panel toward you, and then lift it off of the
enclosure
(Figure 3)
. Set the panel aside.
4.
Turn a drive tray’s thumbscrew counter-clockwise until it pops
out, and then pull out the tray by the thumbscrew
(Figure 4)
.
2 – Drive Installation and Enclosure Setup
2
Figure 2
Figure 1
Figure 4
Figure 3
push the inner
chassis in until
it stops
pull out the top
edge, and then
lift off the cover
slide lock switch to
left, and hold it